UK based
Prices for UK customers are shown inc 20% VAT
Other countries, inc EU, prices shown are ex VAT.
Fits models with this chassis
Conversion Atlas (Old Roco)
to 12V coreless motor
What you need for conversion set
- The model and upgrade kit
- Soldering iron 15W/25W
Good to have:
- General modelling tools
Installation time: Around 15 minutes
Art. code: RCATLA
Contents of the kit (assembled)
1x 7x16 mm motor
1x worm
1x flywheel
Installation instructions
This upgrade is easy to do. Just pull the housing off the chassis. The kit comes pre-assembled, so you only have to remove the old motor. You do this by pressing the tabs that hold the motor in place outward and lift the motor. The push the new motor assembly in place.
If you want to keep the weight, you’ll have to make more space inside. Put a round milling bit in a bench drill and hold the weight in a strong pair of pliers. Create enough space so the worm can turn freely, when you place the weight on the loco.
•
