Conversion to 12V coreless motor
Question? Just reach out!
Smoother running at low speeds*, lower maximum speed and quieter.
What you need for conversion set
- The model and upgrade kit
- Soldering iron 15W/25W
- Epoxy glue
- General model making tools
Installation time: Around 30 minutes
Contents of the kit:
1x 12V coreless motor
1x motor casing
1x flywheel (optional)
Please note the flywheel does not fit in the original housing. Only if you are using the chassis for another housing in for example a 009 model.
This is a very simple installation. To open the model, take out the screw in the chimney. Then use epoxy glue to fit the upgrade in place.